Adhesion primer with vegetable casein

Adhesive primer with plant casein

• Adhesion primer with casein as binder
• With vegetable casein, hydrated white lime, alumina, dolomite flour, dolomite sand
• Grain size 0.5mm

On which surfaces can I use the casein adhesion primer?

• Clay plasters
• Plasterboard
• Chipboard
• Dispersion paints
• Synthetic plasters
• For smooth and slightly absorbent substrate

Important: A further coating with lime adhesive plaster is nevertheless necessary to ensure a certain water reservoir for the subsequent Tadelakt coating! The substrate must be dry, load-bearing, free of grease, dust and oil!

Processing:

Stir the powder into clear water with a whisk (400 - 450 ml of water per 500 g powder). Stir again after 30 minutes resting time. Apply with a brush or alternatively with a roller.

Important: The adhesion primer does not contain any preservative. Therefore, only mix as much as is used on the same day!

Yield:

Ca. 100 g powder / m².

Drying time:

Ca. 8 hours at + 20 °C, if required, work can also be done wet in wet.

Storage:

The adhesive primer with plant casein can be stored for 1 year in unopened packaging.

Safety advice:

This ecological plaster primer contains calcium hydroxide [Ca(OH)²]. It must not get on the skin or in the eyes. Keep away from children!